AC 15-200 Series Refrigerated Air Dryer 13-201 SCFM, Cycling
Pneumatech’s AC series offers superior cycling refrigeration drying technology with low operational costs. All AC dryers are engineered with their proprietary energy saving algorithm, which adapts the energy consumption to the real load by continuously monitoring the ambient temperature and the pressure dewpoint.
Unlike non-cycling refrigerated dryers that operate continuously, Pneumatech AC refrigerated dryers only operate according to the air flow. When there is less cooling needed, the compressor shuts off and power consumption is reduced, providing savings up to 50%.
Benefits & Features:
No-air-loss demand drain
Counter flow heat exchangers, all models
Integrated water separator
cULus listed with: PureLogic™ with advanced saver cycle control
Integral Moisture Separator (Included in RES 1.1 – RES 5.5)
Models: AC-15, AC-20, AC-30, AC-40, AC-50, AC-65, AC-85, AC-100, AC-125, AC-150, AC-200 Refrigerant Type: R134a Note: AC-150 and AC-200 are available in 115-1-60 or 230-1-60 Voltage
*Scroll to the right on mobile to see entire chart
Quantity
Add to Quote
Model
39 °F PDP
Pressure Drop
OPERATING kW
IN/OUT CONN. SIZE
MAX PRESSURE
L x W x H
Weight
Voltage
SCFM*
PSID
(AC/WC)
In.
PSIG
In.
Lbs.
AC-15
13
1.02
0.23
NPT 3/4"
210
20 x 15 x 18
65
115/1/60
AC-20
22
1.6
0.23
NPT 3/4"
210
20 x 15 x 18
70
115/1/60
AC-30
32
1.74
0.34
NPT 3/4"
210
20 x 15 x 18
72
115/1/60
AC-40
42
1.74
0.53
NPT 3/4"
210
20 x 15 x 18
75
115/1/60
AC-50
53
2.47
0.53
NPT 3/4"
210
20 x 15 x 18
80
115/1/60
AC-65
64
3.63
0.53
NPT 3/4"
210
20 x 15 x 18
110
115/1/60
AC-85
85
2.9
0.73
NPT 1"
210
27 x 15 x 26
125
115/1/60
AC-100
106
2.9
0.79
NPT 1"
210
27 x 15 x 26
145
115/1/60
AC-125
127
3.19
1.02
NPT 1"
189
27 x 20 x 27
160
115/1/60
AC-150
127
3.19
1.01
NPT 1"
189
27 x 20 x 27
160
115/1/60
AC-150
127
3.19
1.01
NPT 1"
189
27 x 20 x 27
160
230-1-60
AC-200
201
3.19
1.48
NPT 1"
189
27 x 20 x 27
219
115/1/60
AC-200
201
3.19
1.48
NPT 1"
189
27 x 20 x 27
219
230-1-60
* SCFM flow at 100 ºF inlet temperature, 100 ºF ambient temperature, and 100 psig pressure
Options
*Scroll to the right on mobile to see entire chart
Quantity
Add to Quote
Option for Model
Part#
Descrip.
Option for AC125-200
0000050026
Integrated Line Filters
Option for AC15-65
0000050207
Electric Panel Protection IP54
Option for AC85-100
0000050038
Electric Panel Protection IP54
Option for AC125-200
0000050032
Electric Panel Protection IP54
General Specifications
▸ AC refrigeration dryers: cycling type
▸ Operating pressure: 4-16 barg/58-232 psig
(4-14 barg/58-189 psig from AC 125 onwards)
▸ Max. inlet temperature: 60°C/140°F
▸ Flow rate : 22-1026 m³/hr (13-604 cfm){¹}
▸ Pressure dew point: 3°C/37°F
(ISO 8573-1:2010 class 4)
▸ Power supply: 115/230VAC 50/60 Hz
▸ Refrigerant: R134a (AC 15-100),
R410a (AC 125-600)
¹Flow is measured at reference conditions: ambient pressure of 1 bara and
25°C at operating pressure of 7 barg, inlet temperature 35°C.
Capacity Correction Factors
Correction factors should be applied if the conditions are deviating from the reference conditions. Click here to see Correction Factor Chart
Features & Benefits
▸ Premium energy efficiency
• Energy-saving & flow control: adapt energy
consumption to the real load
• Lowest pressure drop over heat exchanger
and air piping
• Zero-loss drains
▸ Strong performance & reliability
• Stable pressure dew point as low as 3°C
• Guaranteed drying performance in wide
range of ambient temperatures
▸ Optimal control and monitoring
• Energy-saving control
• Voltage-free contact for remote alarm
• Auto-restart after voltage-failure
▸ Easy installation and maintenance at low cost
• Pipe connections on top
• Long service intervals
• Easy access to key components
AirDryerTech.com is owned and operated by mdi, Manufacturers Distributor, Inc. mdi is an Authorized Pneumatech and Nano Distributor. Click Here to view the mdi Line Sheet.
Click Here to view the mdi Line Sheet.