Pneumatech PH HE Series Click for Larger View

Call us TODAY at 727-835-0664 or
Toll Free at 800-761-4298

Request A Quote!

PH HE 2-45 Series Heatless Desiccant Air Dryer

Incorporating high-quality components, PH heatless adsorption dryers provide you with clean, dry air to extend the life of your equipment and products. Heatless adsorption dryers use dry, expanded purge air to remove moisture from the desiccant material.

PH 2-45 HE adsorption dryers are capable of drying air to a PDP of -70°C/-94°F, simply by reducing the flow, thanks to the use of carefully selected molecular sieves. The desiccant is housed in a robust extruded aluminum body, which can operate until 16 barg/232 psig (fatigue load). The dryers are equipped with a mounted pre-filter and an integrated after-filter as standard, can be installed vertically and can also be wall-mounted with a specially designed wall-mounting kit (optional).

The controller ensures the lowest operational costs thanks to compressor synchronization and the optional PDP control. LED’s on the controller indicate whether power supply is connected, towers are pressurized and solenoids are functioning properly. It also provides with preventive maintenance information. Alarms can also be triggered remote thanks to the available voltage-free contact.

General Specifications:
  • Dew points achievable:
  • -40°C/-40°F & -70°C/-94°F
  • Pressure range: 4-16 barg/58-232 psig
  • Ambient temperature range:
  • 1-50°C/34-122°F
  • Inlet temperature range:
  • 1-60°C/34-140°F
  • Power supply: 230VAC 50/60Hz

Models: PH-2 HE, PH-3 HE, PH-4 HE, PH-5 HE, PH-6 HE, PH-11 HE, PH-15 HE, PH-20 HE, PH-25 HE, PH-35 HE, PH-45 HE

*Scroll to the right on mobile to see entire chart
Quantity
Add to
Quote
Model
scfm FLOW at
CONN. SIZE (in)
L X W X H
SHIPPING
WEIGHT
-40°F/-40°C PDP
-100°F/-70°C PDP
INLET
OUTLET
In.
Lbs.
PH-2 HE
2.1
1.5
1/4"
1/4"
8 x 4 x 21
15
PH-3 HE
3.2
2.2
1/4"
1/4"
8 x 4 x 23
18
PH-4 HE
4.2
2.9
1/4"
1/4"
8 x 4 x 28
20
PH-5 HE
5.3
3.7
1/4"
1/4"
8 x 4 x 33
22
PH-6 HE
6.4
4.5
1/4"
1/4"
8 x 4 x 34
24
PH-11 HE
10.6
7.4
3/8"
1/2"
13 x 6 x 25
42
PH-15 HE
14.8
10.4
3/8"
1/2"
13 x 6 x 29
49
PH-20 HE
21.2
14.8
3/8"
1/2"
13 x 6 x 34
55
PH-25 HE
25.4
17.8
1/2"
1/2"
13 x 6 x 40
64
PH-35 HE
36.0
25.2
1/2"
1/2"
13 x 6 x 50
77
PH-45 HE
46.6
32.6
1/2"
1/2"
13 x 6 x 59
97


Options PH HE 2-45
General Specifications:
  • Dew points achievable:
  • -40°C/-40°F & -70°C/-94°F
  • Pressure range: 4-16 barg/58-232 psig
  • Ambient temperature range:
  • 1-50°C/34-122°F
  • Inlet temperature range:
  • 1-60°C/34-140°F
  • Power supply: 230VAC 50/60Hz
Energy Savings



Features & Benefits
Advanced energy management for lowest operating costs
• Compressor synchronization
• Purge nozzle optimization (optional)
• PDP control (optional)
High-quality, high-efficient desiccant, selected for the right application – molecular sieves Spring-loaded cartridges, hence minimizing the risk of crushed desiccant Counter-current regeneration for optimal energy efficiency and guaranteed dry air Designed for transportability & mountability
• Dryer can be installed vertically or horizontally
• Wall-mounting kit (optional) In & outlet can be reversed Low noise levels while purging High reliability and robust design

PH HE 2-45 Series Options
PH HE 2-45 SeriesOptions



Email this Page 

mdi
   
AirDryerTech.com is owned and operated by mdi, Manufacturers Distributor, Inc. mdi is an Authorized Pneumatech and Nano Distributor.
Click Here to view the mdi Line Sheet.