Nano D5 Series externally heated twin tower Air Dryer Click for Larger View

Call us TODAY at 727-835-0678 or
Toll Free at 800-761-4298

Request A Quote!

Nano D5 Series Externally Heated
Twin Tower Desiccant Air Dryers

200 - 3,500 scfm
The nano D5 externally heated desiccant air dryers use an electric heater to heat the dry purge air used for regeneration, increasing efficiency and reducing the amount of purge air required. For consistent performance and cost-effective operation, these dryers are an excellent choice.

Nano D5 NEX Externally Heated twin tower desiccant air dryers reliably give you:
• advanced PLC controls allow you to monitor the operation of the dryer through an easy to use digital display.
• multiple thermocouples control regeneration and provide constant temperature.
• secondary heater contactor provides protection against overheating in the event of a primary contactor failure.
• visual alarm lights and step by step diagnostics simplify troubleshooting.
• rugged field proven digitally controlled dual acting high performance butterfly valves and stainless steel spring return wafer check valves ensure long operating life and minimum maintenance.
• insulated external electric heaters for efficient regeneration in all operating conditions.
• nano M01 coalescing pre filters and NHT M1 high temperature after filters with high quality hygroscopic desiccant ensure low pressure drop and consistent dew point performance.
• nano understands that every customer and every application is different. That is why we provide a wide range of available options to customize your dryer to your specific needs.

Model(s): NEX 200, NEX 250, NEX 300, NEX 400, NEX 500, NEX 600, NEX 800, NEX 900, NEX 1000, NEX 1250, NEX 1500, NEX 2000, NEX 2500, NEX 3000, NEX 3500

*Scroll to the right on mobile to see entire chart
   Model
Inlet & Outlet
NPT(F)/FLG(1)
scfm(2)
Nm3/h(2)
recommended
pre Filter(3)
recommended
after Filter(3)
NEX 200
1"
200
340
NF 0290 M01
NHT 0300 M1
NEX 250
1½"
250
425
NF 0290 M01
NHT 0300 M1
NEX 300
1½"
300
510
NF 0325 M01
NHT 0300 M1
NEX 400
2"
400
680
NF 0450 M01
NHT 0450 M1
NEX 500
2"
500
850
NF 0700 M01
NHT 0650 M1
NEX 600
2"
600
1,020
NF 0700 M01
NHT 0650 M1
NEX 800
3"
800
1,360
NF 0850 M01
NHT 1000 M1
NEX 900
3"
900
1,530
NF 1000 M01
NHT 1000 M1
NEX 1000
3"
1,000
1,700
NF 1000 M01
NHT 1000 M1
NEX 1250
3"
1,250
2,125
NF 1250 M01
NHT 1250 M1
NEX 1500
3"
1,500
2,550
NF 1500 M01
NHT 1600 M1
NEX 2000
4"
2,000
3,400
NFZ 2500 M01
NFZ 2500 M1HT
NEX 2500
4"
2,500
4,250
NFZ 2500 M01
NFZ 2500 M1HT
NEX 3000
6"
3,000
5,100
NFZ 3500 M01
NFZ 3500 M1HT
NEX 3500
6"
3,500
5,950
NFZ 3500 M01
NFZ 3500 M1HT
(1) 2” and below are NPT(F) threaded. 3” and above are flanged. All units with 3” piping will be ANSI welded pipe and the filter connections will be flanged
(2) at an inlet conditions of 100 psig and 100°F. For all other inlet conditions refer to the correction factors
(3) recommended for all applications


*Scroll to the right on mobile to see entire chart
   Specifications
Standard
Optional
maximum particle size (ISO class) (6)
class 2 (1 micron)
class 1 (0.01 micron)
maximum water content (ISO class) (6)
class 2 (-40°F pdp)
-
design operating pressure range
80 to 150 psig
58 to 250 psig
recommended operating temp range
40 to 100°F
-
design operating temperature range
35 to 120°F
-
power supply requirements
460 VAC / 60 Hz
575V / 60 Hz or 380 VAC / 50 Hz
(6) per ISO 8573.1:2010

➤Click Here for Pressure & Temperature Correction Factors Chart

How It Works

• regeneration circuit is fully insulated for maximum efficiency.

• specifically designed for a long and dependable operating life in harsh industrial environments.

• metal on metal seats for reliable high temperature operation.

• dependable stainless steel spring return check valves provide worry-free operation and minimal maintenance.

• pneumatic actuators ensure precise proportional control and a bubble tight seal.

• stainless steel and Teflon® seats in a reliable and low pressure drop design.

• purge flow is field adjustable with this precision valve with visual setting indication.

• easily adjust the purge flow to match the operating conditions.

• synoptic display with visual dryer operation.

• alarm indication and description.
D5 Heated Desiccant Dryers How It Works
Options & Accessories
• Dew Point Monitors
     ○ integral energy saving outlet dew point control & display
     ○ stand alone portable dew point monitor
• Filter + bypass options
     ○ three (3) valve block & bypass
• Electrical protection upgrades
     ○ NEMA 4 electrical protection
     ○ NEMA 4X electrical protection
     ○ NEMA 7 electrical protection
• Other options & upgrades
     ○ low ambient (< 32°F) temperature protection
     ○ stainless steel control tubing
     ○ visual moisture indicator
     ○ failure to shift alarm
     ○ run time hour meter
     ○ additional pressure gauges (each)
     ○ additional temperature gauges (each)
     ○ CSA approval for Canadian applications
     ○ 400 Volt 3 Phase 50Hz controls
     ○ 575 Volt 3 Phase 60 Hz controls
     ○ tower & hot piping insulation
     ○ NEMA 4 fusible disconnect



Nano D5 Series heated Air Dryer Dimensions
*Scroll to the right on mobile to see entire chart
Model
A Height (in)
B Width (in)
C Depth (in)
Weight (lbs)
NEX 200
34"
92"
35"
650
NEX 250
36"
92"
34"
850
NEX 300
36"
92"
34"
1,140
NEX 400
47"
92"
45"
1,300
NEX 500
47"
92"
45"
1,400
NEX 600
47"
92"
45"
1,500
NEX 800
70"
96"
50"
3,450
NEX 900
70"
96"
50"
4,050
NEX 1000
70"
96"
50"
4,250
NEX 1250
69"
97"
60"
4,550
NEX 1500
69"
97"
60"
5,150
NEX 2000
85"
113"
68"
8,900
NEX 2500
85"
113"
68"
9,150
NEX 3000
125"
133"
82"
11,050
NEX 3500
125"
133"
82"
11,550



Email this Page 

mdi
   
 AirDryerTech.com is owned and operated by mdi, Manufacturers Distributor, Inc. mdi is an Authorized Pneumatech and Nano Distributor.
Click Here to view the mdi Line Sheet.